Need a complete router package with router, collet, nut, wrenches, drive, and reactor?  We can offer the complete package and advise simple instructions for start-up.  Or, replace your Porter-Cable, Milwaukee, Bosch and Makita routers with industrial grade Fimec Spindle Motors with one of our router packages.  Replacing or considering a handheld router.  Click to consider some of these comments from our customers.  These packages are ideal for CNC routers where standard hand held routers are utilized as the cutting tool.

The below "Motorpacks" include the spindle motor, 230V variable speed drive, one collet, one nut, 2 wrenches, and a 3 phase reactor to smooth the voltage curve to the motor, improve the operating efficiency, increase drive system reliability, reduce harmonics, filter power line disturbances, reduce surge currents, reduce dv/dt, extend transistor life, reduce motor noise and temperature, improve true power factor, and increase motor life.  See details on motors.

Adapter Plates are available for many Perske® Motors which will place the Fimec spindle nose at the same position as the Perske spindle nose.

Notes:

• Lead-time will typically be stock, but is subject to change, depending upon availability.
• Pricing is subject to change without notice.  Please contact us to confirm pricing with your order.
• Specify collet size at time of order.  Collet sets can be purchased as well.
• If a remote keypad with a 10 foot cord, the price is $130.00.
• Verify input to drive  is 208V to 240V / 3 Phase.  Drives to accept 120V (to 1.5 HP) 208V to 240V / 1 Phase, and output 3 phase to the motor, are available at an additional price of $25 to $125, depending upon size.  400V to 480V / 3 Phase Input Drives are available at an additional price of $0 to $75.  480V to 590V / 3 Phase Input Drives are available at an additional price, depending upon size.
• Do you only have 24DC Power?  We can make this work with special transformer / drive combinations up to 5HP. 
• Click here for www.ekstromcutter.com  including: double / single flute compression spirals, double flute "O", triple flute, four flute, double v flute, single and flute upcut and downcut, and various other styles including saw cutters.  Note, $100.00 minimum applies to tool bit orders.

  We have since diversified our business to offer various products and services including spindle motors, spindle routers, high speed spindle motors, high speed spindle arbors, high speed custom motors, spindle saws, spindle shafts, spindle shaft saw motors, saw motors, high speed spindles, high speed spindle router motors,  high speed routers to 18000 RPM and 24000 RPM at 300Hz and 400Hz, motor routers, motor spindle arbors,  arbor motors,  spindle repairs. metal working spindle repair, wood working spindle repairs, spindle rebuilds, high speed spindles, high speed motors, high speed routers, high speed router saw motors, compact saw motors, wood saw motors, aluminum saw motors, sawmotors, high frequency spindle repair, high frequency routers, high speed spindle motors, cms spindle repair, cms router repair, cnc router spindle repair, cnc routers, cnc wood routers, multihead cnc routers, hsd spindle repair, hsd motor repair, hsd router motor retrofits, hsd spindle motor bearing replacements, colombo motor, colombo router motors, colombo spindle motors, router motor, router spindle, router shaft motor, router tool, saw arbor motor, spindle router,  spindle routers, spindle repair,  spindle motor repair,  high speed motor,  custom motor  pulley spindle,  cnc router,  cnc router motor,  shaper motor,  shaper spindle,  Acc himmel saw arbor replacement,  Accurouter spindle repairs, accu systems spindle repair, advanced automation spindle repairs,  aggregate tooling repairs, agmusa spindle repairs,  american contex spindle repair,  anderson router spindle repairs, arbor saws, arbor saw motors arbor spindle, high speed arbor pulley arbor, custom spindle arbor, custom saw arbor, special saw arbor, special arbor saw,  custom arbor motor, special arbor motor shaft, motor arbor spindle, arbor motor shaft, arbor motor, arbor spindle repair,  benz aggregate tooling repair,  benz right angle head repair, biesse spindle repairs,  block spindle repairs,  block spindles,  bm root parts, boring head, boring machine,  boring mill,  busellato spindle repairs  Casadei spindle shaper repairs,  challoner tenoner motor repairs,  cms router repairs,  cms spindle motor repairs,  cnc holz spindle repairs,  cnc komo spindle repairs,  cnc komo router repair, industrial cnc routers,  cnc router motors  cnc tooling,  cnc router tooling,  CNT spindle repairs,  Colombo motor repairs,  Colombo router repairs,  Colombo spindle repair,  Columbo spindle repairs,  command tool holders,  command iso tool holders,  command hsk tool holders,  compact motors,  compact square motor,  compact rectangular motor,  cr onsrud spindle repairs, diehl rip saw parts,  diehl ripsaw parts,  drill head,  multispindle drill and boring heads,  edgebander spindle repairs, electric motor saw,  electrospindle,  elte spindle repairs, eurospindle spindle repairs,  fimec motors, fimec spindle motors,  fimec saw arbor motor,  fimec motor, fimec saw,  flexicam spindle repairs,  foemat spindle repair,  gamfior spindle repair,  gamfior motor repair,  gerber cnc spindle repairs,  gerber machine spindle repairs,  gerber router spindle repairs,  gerber scientific spindle repairs,  gerber scientific inc spindle repairs,  gerber scientific product spindle repairs,  gilman spindle repairs,  gilman motor repair,   hds motor spindle repairs,  heian spindle repairs,  heian router spindle repairs,  hendrick cnc repairs, high frequency motors, high frequency motor spindle,  high frequency spindle,  high speed bearings,  high speed bearing housing,  high speed electric motor,  high speed machining,  high speed router, high speed saw motor,  high speed saw spindle,  high speed spindle,  himmel motor replacements,  himmel saw motor replacement, holz spindle repairs,  holz her spindle repairs,  holzma spindle repairs,  hsd motor spindle repairs,  hsd spindle repairs, hsd spindle motor repairs,  iec induction motor,  iec motor,  ima spindle repairs,  intermac spindle repair, intermac router repair,  isel techno,  joseph machine spindle repairs,  kaval spindle repair,  komo spindle repair,  komo machine spindle repair,  komo router spindle repair,  kress router, kress spindle, kress motor, larken spindle repair,  light weight motor,  martin shaper spindle repair,  mattison rip saw,  Mattison ripsaw, metric motor,  midwest automation spindle repair,   morari gear head repair,  morari aggregate repair,  morbidelli spindle repair,  motionmaster spindle repair, motion master spindle repair, motion master motor repair, multi spindle drill heads,  multicam spindle repairs,  multiple spindle drill head,  multiax spindle repair,  northwood spindle repair, omlat spindle repair,  onsrud spindle repair,  onsrud router spindle repair, Perske spindle repair and replacements,  perske motor spindle repair and replacements,  perske router spindle repairs and replacements,  perske saw arbor motor replacement,  perske spindle repairs and replacements, pin routers,  point to point drill,  porter cable router replacements, quick-tech spindle repairs,  quintax spindle repair,  reichenbacher spindle repair,  reuland motor repair,  right angle drill head,  right angle head,  right angle milling head, right angle drill head, right angle high speed milling tool, compact right angle head ,right angle aggregate,  rip saw parts, ripsaw parts,  ritter spindle repair,  rockford drillhead repairs,  routech spindle repairs,  router motor repair,  router collet and router toolholders,  router motor,  router spindle,  sampson automation spindle repair, saw,  saw motor,  scm spindle repairs,  scmi spindle repairs,  scm spindle shaper repairs, scm spindle motor repair,  shaper,  shaper motor,  shoda spindle repairs,  shoda router spindle repairs,  shopbot spindle repairs,  shop saber spindle repairs,  spindle motor packages, saw motor package,  spindle drive,  spindle motor,  spindle motor repair, spindle rebuild,  spindle repair,  standard router spindle repairs, stone cutting, sugino spindle repair, table saw motor,  techno router spindle repairs,  techno isel spindle repairs, teknomotor spindle repairs, thermwood spindle repairs,  thermwood router spindle repairs,  tilting arbor saw,  tyler machinery spindle repair,  used cnc router, used spindle motor, rebuilt spindle motor,  uva internal grinder repairs, wadkin spindle repairs,  weeke spindle repairs,  weg electric motor,  weg motor, wisconsin drill head repairs, wood router, wood shaper , wood shaper cutter,  wood working router, wood working shaper,  wood working shaper cutter, wood working spindle,  yaskawa spindle drive, zaigar spindle repairs.